27.5'' FRONT Bafang 350W - Motor and Controller Kit
Front Wheel Kit using the very robust Bafang FM G020.350W Front Geared Hub Motor
Don't let that 350W label fool you, these motors are incredibly robust and in the 100s of these motors that we have installed, they can handle double that power for extended periods of time without a sweat!
They are in fact an updated version of the older Bafang 500W Models, so we are not sure why they are actually labelled 350W, they are similar in stature to the 750W motors we have used before.
We will build a wheel for you and include the electronics needed for the wheel to run, this DOES NOTinclude a battery!
This includes - Bafang Wheel laced into a rim (V-Brakes are usable, as well as disc brakes) - KT 36V / 48V 22A Controller - LCD5 Display (Side Mounted, Stealthy) - Pedal Assist Sensor (of your choosing) - Throttle Type (of your choosing) - Waterproof Harness - Brake Sensors (of your choosing)
This does not include; 1) Controller Bag / Case If needed you can purchase thatHERE
2) Lights, we have both Front and Rear lights that can directly plug into the harness availableHERE
3) Torque Arm - If you have an ALUMINUM fork it is strongly recommended to run a torque arm or the front fork dropout may SNAP (which is not good at all). Steel will bend / flex, but aluminum will just snap and it can of course be dangerous when this happens, not to mention your forks would be ruined at that point. They can be purchasedHERE(12mm version in this case)
4) Battery We have a wide selection of batteries that can be used, check them outHERE