26'' Front Hub Motor Kit - NO BATTERY - 500 / 750 Watt - Bafang Refurbished
Complete Conversion Kit
Motor / Wheel - Complete Front Hub Wheel with Bafang Motor - Tire Installed onto Rim with Tube - There is no battery included in this listing - Electronics Accessories (listed below)
PLEASE NOTE : This kit will give approx 500W with a 36V battery, and approximately 750W with a 48V battery.
Actual numbers are here; 36V x 22A (peak) = 792 Watts 36V x 11A (constant) = 396 Watts
48V x 22A (peak) = 1056 Watts 48V x 11A (constant) =528 Watts
So if you use a 36V battery with this kit, it will perform very similar to a 500W kit, and a 48V will perform like a 750W kit.
These motors are ROBUST! They can handle a LOT of power, we have pushed them very far without burnout, they are pretty amazing. These are BAFANG high quality motors, very over built!
Accessories - Controller (22Amp = 500Watts) - Works with 36V or 48V Batteries (even 52V) - LCD Display - Throttle (Select your preference) - Pedal Assist Sensor (Select your preference) - Brake Sensor (Select your preference)
These are USED wheels that were pulled off Rental E-Bikes (Uber). They have been tested, cleaned, trued, and then are sent off. Many of the wheels we do not send out to customers because they don't pass our tests, as they do need to perform as good as new (they just may have some scratches etc).
1) Torque Arm: If you have an aluminum fork (test with a magnet) it may be advised to buy a Torque Arm. You can find one HERE
2) If you'd like to plug in lights into this controller, we have directly compatible plug in lights that will run off the battery, and turned on by holding UP on the display. You can find themHERE (the KT Controller Direct Plug In)
3) If you want to be able to tuck your controller into a bag and clean up the wiring, you can view our controller bags HERE